5 tips for selecting gloves for motor and summer

      5 tips for selecting gloves for motor and                                      summer


Summer is the time of the year in which motorcyclists enjoy the most, but it can be quite uncomfortable when driving in the heat or high humidity.
5 tips for selecting gloves for motor and summer
Security must always be in the first place, and this should also be considered when choosing the right gloves and other protective equipment, which does not mean that one should take the very best gloves on the market for the hottest months.
Tip # 1: Think about the material
There are many different types of materials on the market that make gloves for the engine, and a good pair can make a big difference in the feeling of wearing. If you've really squeezed into leather gloves (in fact, the best thing to do with them) is to look for perforated leather gloves. This type of glove has small holes on it and allows air flow through the hands. On the other hand, if you are not hate other options, there are also synthetic materials that are very light, provide good protection and keep hands cooler.
Tip # 2: Look out for ventilation
The most important part is to choose those that keep the hands cool and comfortable with good ventilation in the gloves. There are various options in this area as well. Perforated gloves have, as their name implies, holes. There are other gloves that have parts that can be opened and closed to control how much air enters at different times. Check these options before choosing.
Tip # 3: Consider gloves with no fingers
For the best possible cooling, you will look for gloves that cover as little as possible.Regardless, you will want your hands and tips to be protected, but you can leave your fingers uncovered. Fingerless gloves often have padded protection in the right places while at the same time good ventilation of the air.
Tip # 4: Do not sting on protection
During the summer gloves do not serve to heat your hands, but to protect them, and if your gloves do not provide the right protection, there is no need to wear them. Do not pick the easiest glove just to keep your hands cooler. Choose one with a good base, slip protection, gel pads and other protective measures. Security is always in the first place, and the best ventilation systems and materials come only after security.
Tip # 5: What is the procedure?
Gloves should have a good fit throughout the year. When looking for your new gloves, consider whether the grip with them will be the same and when wet. Even when it does not fall, sweat and it's always possible to glove gently. You need gloves with a good grip and when it's a little damp. If the procedure does not change, you may have found good gloves for yourself!

Primjedbe

Objavi komentar

Popularni postovi s ovog bloga

Piaggio NRG

Slika
Piaggio NRG The  Piaggio NRG  is a scooter made by Piaggio since 1994. The first model (mc1) used a liquid-cooled, two-stroke engine. The mc2 differed from the mc1 only visually and later models (since 1998) had optional air-cooling and rear disc brakes (the Hi-Per2 engine). The mc3 saw not only further visual improvements, but also a rev counter, the new Hi-Per 2 engine, air-cooling (optional), rear disc brakes (optional) and direct fuel injection (optional). The NRG Power (introduced in 2005) changed drastically from the fairly similar 3 previous models. The NRG Power and mc3 were supplied in three versions: NRG Power DT / NRG mc3 DT (air-cooled, rear drum brakes) NRG Power DD / NRG mc3 DD (liquid-cooled, rear disc brakes. DD stands for "Double Disc") NRG Power PureJet / NRG mc3 PureJet (direct fuel injection) Piaggio and Gilera have produced models similar to the mc1: NTT (10 inch rims and a front splitter) Piaggio Typhoon / Gilera Typhoon (10 inch rims,
Pročitajte više

Piaggio Skipper

Slika
                           Piaggio Skipper    Piaggio skipper The  Piaggio Skipper  is a large scooter built by the Italian vehicle manufacturer Piaggio between 1993 and 2002. The skipper was introduced in May 1993 in Nice.   But since the name Skipper was protected by trademark law in Germany, the vehicles were initially offered under the name SKR.   The version with 150 cm³ presented in June 1993 was revised in 1994 and was only available in Germany at the end of 1996, whereby all models with a new seat, darker plastic parts, more modern lettering and new colors were upgraded optically.   The production was stopped in 1997. In 1998 the models  Skipper LX 125  and  Skipper LXT 150 were released  .   Until 1999 air-cooled single-cylinder two-stroke engines were available with 125 cc and 150 cc of the previous model, from 2000 air-cooled four-stroke engines Leader generation with 125 cc and 150 cc installed and a new headlamp and a multifunction display.
Pročitajte više

Top 5: The Most Expensive Motorcycles In The World

Slika
    Top 5: The Most Expensive Motorcycles In The World The most expensive engine of $ 3.6 million Imagine that in the garage you have a "Bugatti Veyron", "ferari la ferari", "McLaren P1" and "lamborghini aventador".   And then sell them and buy a motorcycle, just one motorcycle that costs like these four super cars!   Well, at least you'll have plenty of places in the garage! The most expensive cars are generally known.   A little speed fan did not hear about Bugati, Lamborghini, Ferrari, Koenigsegg, McLareni and other fantastic expensive and fast cars.   But do you know which motorcycles are the most expensive? The fifth place on our list is Ecosse Titanium FE Ti XX.   His designer and founder of Ecosse, Donald Atchison, has so far produced just over a dozen copies. The engine is in the V diagram at an angle of 45 degrees, has a displacement of 2409ccm and a strength of 225 "horses".   The ram and exhaust syste
Pročitajte više